Flask Systems
Features of a flask system should be easy to use, accurate, and reproducible. That’s what we were looking for to support our customers. It’s unbelievable what can and should be duplicated!
Both anaxFORM kits contain a well co-ordinated selection of materials ensuring optimum working conditions and best results. All kits are furnished with an effective silicone separator. It‘s a real pleasure to work with the anaxform flasks. As said before: anaxform is easy to use, accurate, and reproducible.
SKU
: 21200003
Width
: 6.00 (in)
Height
: 6.00 (in)
Depth:
6.00 (in)
The Prothetik Kit for dentures, acrylic crowns and bridges comprises the metal flask with the according model formers as well as all silicones required. The big injection syringe completes this kit.
Kit
Contents
:
Metal flask incl. 2 silicone drills
anaxFORM base former set (2)
Matrix Form 60 A + B 500 g each
Matrix Form 70 A + B 5.000 g each
Matrix Flow 56 violet 2 x 50 ml
Divorce (silicone separator) 20 ml
Separator 1.000 ml
PMMA injector
4 measuring spoons
10 intraoral tips yellow
SKU:21200002
Width: 6.00 (in)
Height: 6.00 (in)
Depth: 6.00 (in)
If you work with light-curing composites, the anaxFORM LC Kit offers all you need, includes clear silicones, for light polymerisation directly in the flasks.
Kit Contents:
anaxFORM glass flasks small & big
(incl. two transparent acrylic covers each)
Matrix Form 60 A + B 500 g each
Matrix Flow 70 clear 2 x 50 ml
Matrix CAST clear A + B je 1.000 ml each
Divorce 20 ml
4 measuring spoons
10 intraoral tips yellow
SKU: 21200100
Width: 6.00 (in)
Height: 6.00 (in)
Depth: 6.00 (in)
A very neat, accurate way to transfer the wax-up into the definite restoration. This means working under control in the habitual, determined position. Work steps of bar-retained constructions can easily be reproduced by means of counterparts out of silicone. Even in the FGP technique, the anaxFORM Verticulator can help to finish restorations safely. (Including 1 transparent upper part)
SKU: 21200012
Width: 1.50 (in)
Height: 0.50 (in)
Depth: 6.50 (in)
anaxFORM metal flasks are designed for the quick and easy production of temporaries, dentures, splints, and precision-fitting repositionable gingival masks. There's no easier and more accurate way.Now, you no longer need to vertically increase the occlusion when making restorations. The flask furnished with spacers spares not only silicone, but also your nerves, by allowing for multiple positioning options. The precise splitcast base always registers your model in the right position. (Including silicone drills 2.5 mm and 4 mm)
SKU: 21200113
Width: 1.50 (in)
Height: 0.50 (in)
Depth: 6.50 (in)
The transparent flask lid for all dental technicians who want to use the metal flask for light-curing tasks as well. Just replace the lid and you can start working as desired!
SKU:
21200202
Width:
1.50 (in)
Height: 2.00 (in)
Depth: 10.00 (in)
Silicone Base Formers Set (Baseplates and Rings), two model base formers out of metal with rubber rings for the anaxFORM metal flask.
SKU:
21200015
Width:
1.50 (in)
Height: 0.50 (in)
Depth: 6.50 (in)
The multipurpose flask for duplications when making full dentures and implant-borne removable restorations.The three-part flask has a transparent lid to make the use of light-curing acrylics or composites possible. Thanks to the internal splitcast, the models can be perfectly repositioned. The flask has a perfect height for duplication of taller implant-borne restorations on the model.
SKU: 21200013
Width: 1.50 (in)
Height: 2.00 (in)
Depth: 10.00 (in)
Two flasks in different sizes for restorations in combination with facing composite.The flasks are designed for working without a plaster model. Magnets or a central screw at the bottom of the flask keep the upper part in place. The set also includes one lower part of each size and two lids made of acrylic.
This site was created with the Nicepage